【Buy 6 Get 4 Free,Add 10】ELEGOO PLA+ 3D Printer Material Filament Tougher 1KG

Price: 20,59 USD

Technical Specifications

Density: 1.25g/Cm³

Melt Index: 10(190°C/2.16kg)g/10min

Tensile Strength（X-Y): ≥ 60mpa

Elongation At Break（X-Y): 23%

Bending Strength:80mpa

Bending Modulus:1911mpa

Charpy Impact Strength:9j/M²

Thermal Deformation Temp: 53°C(0.45mpa)

Fan: 100%

Line Length: (1.75mm) 330-335m

Rockwell Hardness: 88

Print Layer Thickness: 0.2mm

Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C)

Recommended Heated Bed Temp: 50-65°C

Printing Speed: 30-70mm/S

Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab