SUNLU Nylon Like Beige 1KG 3D Printer Resin,For LCD DLP SLA Resin 3D Printers

1. Shake well before use. It is recommended to stand upside down three times and do not use resin in areas exposed to sunlight;

2. Do not take orally, keep away from children, wear gloves before use, avoid direct contact with skin, and maintain indoor ventilation; Do not enter the eyes. If in contact, rinse with plenty of water as soon as possible. If you feel unwell, seek medical attention in a timely manner;

3. After printing the resin model, it needs to be cleaned with high concentration alcohol (it is recommended to have a concentration above 95%, the higher the better) for about 30 seconds; After cleaning and drying with alcohol, perform secondary curing to achieve optimal performance;

4. Do not pour the resin used in the material tank back into the unused resin, and do not leave the resin unused in the material tank for a long time. (If not used for a long time, the resin can be introduced into the container and sealed with a cling film to prevent it from being contaminated and affecting the printing effect.);

5. Store at room temperature in a dark place, where sunlight contains ultraviolet rays and can cure photosensitive resins; It is recommended to store at an ambient temperature of 15-35 ℃. The lower the winter temperature, the higher the resin viscosity;

6. Sealed storage to avoid dust or moisture that may affect printing quality.