3D Filament PLA 10Rolls 175mm 3D Printing No Bubbles No Drawing Multiple Colors

PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;

2. Soft and warm colors

3. Low shrinkage rate;

4. High strength and rigidity;

5. Very good toughness, not easy to break

6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.

7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.

8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

PLA META Filament Parameter

Wire diameter: 1.75MM

Tolerance: ±0.02MM

Printing temperature: 180-200℃

Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C

Heating 60-80℃, no glue

Rally KGF: 9-12

Melt index: 8-12g/10min (190℃, 2.16kg)

Elongation at break: 35%

Density: 1.24 (g/cm³)

Printing speed: 50-100MM/s

Bubbles: 100% zero bubbles

PETG Filament Features

1. Environmental protection and non-toxic;

2. Low shrinkage;Bright color;High transparency and good gloss.

3. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent, weather resistance, and good adhesion.

4. Good dimensional stability, no cracks And warping.

Suitable for all types of FDM3D printers, suitable to Co-print all kinds of commonly used models, crafts, industry Pieces, advertising words, etc.

PETG filament is easy to use like PLA, durable strength like ABS

PETG Filament Parameter

Wire diameter: 1.75/3.0MM

Tolerance: ±0.02MM

Printing temperature: 220-250℃

Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃, no glue

Rally (KGF): 8-14

Melt index: 6-11g/10min

(220℃, 2.16kg)

Elongation at break: 210%

Printing speed: 50-100MM/s

Air bubbles: 100% zero bubbles

PLA Filament Features

1. Environmental protection , non-toxic , biodegradable ;

2. No Bubble , Low shrinkage , bright color ;

3. High strength and strong rigidity ;

It is suitable for all types of FDM3D printers , suitable for printing crafts , artworks and industrial design samples, etc.

PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

PLA Filament Parameter

Wire diameter: 1.75/3.0MM

Tolerance: ±0.02MM

Printing temperature: 200-230℃

Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃, no glue

Rally (KGF): 11-16

Melt index: 7-9g/10min

(190℃, 2.16Kg)

Elongation at break: 4%

Printing speed: 50-100MM/s

Air bubbles: 100% zero bubbles