Silk PLA 3D Printer Filament Triple Color Silk PLA Filament 1.75Mm 3D Printing F

 Go to store

Price: 9,61 USD

1. Before printing, please check the temperature setting as silk PLA filament printing temperature is about 190-235℃. And please make sure that the 3D printer filament is not tangled.

2. Cleaning or changing the nozzle before printing is a good way to reduce jam if the nozzle was used for many times.

3. The filament tends to absorb moisture from air, which can make it brittle or degrade. Please make sure 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.

4. The first layer printing speed is recommended to set in 40-60mm/s. It will make the later printing process more conductive.

5. Some PVA glue is recommended to apply if the plate surface has been used for a long time;

6. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;