【Buy 10 Pay 6,Add 10】ELEGOO PLA Matte Filament 1.75mm for Most FDM 3D Printers

Price: 21,99 USD

Technical Specifications

Density: 1.31g/Cm³

Melt Index: 5-8(190°C/2.16kg)g/10min

Tensile Strength（X-Y): ≥ 42mpa

Elongation At Break（X-Y): 23%

Bending Strength:80mpa

Bending Modulus:2825mpa

Charpy Impact Strength:5.9j/M²

Thermal Deformation Temp: 58°C(0.45mpa)

Fan: 100%

Line Length: (1.75mm) 330-335m

Rockwell Hardness: 88

Print Layer Thickness: 0.2mm

Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C)

Recommended Heated Bed Temp: 50-65°C

Printing Speed: 30-70mm/S

Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab